HydraSkin Rejuvenation
Eleven handpieces on one console. Cleanse, exfoliate, hydrate, infuse serums and firm the skin in a single personalised session for the face, eye area and scalp. Cosmetic use only.
- Deep cleansing
- Hydration
- Serum infusion
- Fine lines
- Congested skin
- Scalp care
How it works
One console with a touchscreen runs 11 interchangeable handpieces, used alone or one after another in a single facial. The hydra dermabrasion tip delivers solution from one of three bottles while vacuum lifts debris into a separate waste bottle.
The other handpieces add ultrasound, radiofrequency warmth, gentle electrical stimulation, plasma, oxygen bubbles, fine mist and hot or cold therapy. The practitioner selects only the steps each client needs.
Eleven handpieces
- Hydra dermabrasion
- Vacuum cleansing with solution infusion. About 15 min for a full face
- Oxygen spray
- Fine hydrating mist. 1–3 min
- Ultrasonic scrubber
- 25 kHz vibration to lift dead skin cells and sebum. 10–15 min
- Ultrasound infusion
- 1.1 MHz ultrasound to support serum absorption. 5–10 min
- Radiofrequency
- 1 MHz controlled warmth for skin firmness. 5–10 min
- EMS infusion
- With a facial probe and an eye-area probe. 10–15 min
- Microcurrent
- Multi-point comb for face and scalp. 5–10 min
- Plasma
- Skin surface care. 10–15 min
- Oxygen bubble
- 25–30 min, followed by a mask
- Cold & warm hammer
- −10°C to +40°C. 1–3 min as a finishing step
- Mask infusion
- Used with a sheet mask. 10–20 min
Fluid system
- Three solution bottles, selected on screen
- Separate waste bottle with a full-bottle alarm
- Adjustable vacuum and water flow
- Three output modes: continuous and two intermittent
Running costs
- Single-use hydra dermabrasion tips, replaced for every client
- Treatment solutions, serums and conductive masks
- Tubing is flushed after every client
Full specification
- Handpieces
- 11 interchangeable
- Display
- 10.2-inch colour LCD touchscreen
- Hydra dermabrasion
- 20 W, 12 V, 150 kPa
- Oxygen spray
- 20 W, 12 V, 80 kPa
- Ultrasonic scrubber
- 25 kHz, 10 W
- Ultrasound infusion
- 1.1 MHz, 25 W, 24 V
- Radiofrequency
- 1 MHz, 20 W
- Cold & warm hammer
- 10 W, −10°C to +40°C
- Mask infusion
- 1 mA
- Housing
- Steel, on four lockable caster wheels
- Dimensions
- 47 × 37 × 126 cm
- Treatment areas
- Face, eye area and scalp
Specifications are taken from the operator manual and may vary with configuration and software version. For professional use by trained practitioners.
Questions
What treatments can HydraSkin Rejuvenation perform?
Deep cleansing, hydrodermabrasion, exfoliation, hydration, serum infusion and skin firming for the face, eye area and scalp. It is intended for cosmetic use only.
How long does a hydra dermabrasion facial take?
The hydra dermabrasion step takes about 15 minutes for a full face. Other steps, such as ultrasound infusion or the cold hammer, add 1–15 minutes each.
What consumables does HydraSkin use?
Single-use hydra dermabrasion tips, replaced for every client, plus treatment solutions, serums and conductive masks.
Buy outright, rent, or rent to own
Rental and rent-to-own agreements through independent finance providers. Subject to status.
Warranty & serviceRepair or replace
Warranty terms are set out in your contract. We repair the device, or replace it with a new one if a repair is not reasonable.
TrainingVTCT Level 3, Ofqual regulated
A regulated qualification for practitioners using HydraSkin Rejuvenation, delivered by KClinics Academy. Optional, at an additional cost.
Request a price for HydraSkin Rejuvenation
Tell us about your clinic. We'll reply with pricing, delivery details and answers to your questions.