FractionaGlow CO2 Fractional Laser
A fractional CO2 laser for skin resurfacing. The scanner lays down a grid of micro-beams up to 20 × 20 mm, with adjustable energy, density and pattern, delivered through a 7-joint articulated arm.
- Skin resurfacing
- Acne scars
- Fine lines
- Skin texture
- Enlarged pores
- Stretch marks
How it works
A CO2 laser at 10,600 nm is split by a scanner into a grid of micro-beams. Each beam treats a tiny column of skin and leaves the surrounding tissue intact, which supports the skin's own renewal and the formation of new collagen.
The operator sets the energy, the distance between dots and the pattern for each area. Random and centre-split scanning orders spread the heat between neighbouring dots.
Scanning control
- Patterns
- Triangle, square, round, hexagon and line
- Scan order
- Sequential, random and centre-split
- Adjustable
- Energy, dot distance, interval and overlap
- Operating modes
- Fractional scanning, plus a pulse mode with adjustable power, on-time and off-time
Treatment course
- Acne scar treatments are usually performed 3 to 5 times
- Interval of 1 to 3 months between treatments, and never less than 1 month
- Scabs at the treated dots fall away in about 3 to 6 days
- Sun protection is needed after treatment
Safety
- Emergency stop button and key switch
- Foot switch control: the laser fires only while the pedal is pressed
- Water-flow protection: no laser output without cooling flow
- Red aiming beam, 5 mW or less
- Protective eyewear for operator and client
Running costs
- Water cooling circuit
- Lens paper and cleaner for the treatment head
- No cartridges
Full specification
- Laser type
- CO2 glass tube laser
- Wavelength
- 10.6 μm (10,600 nm)
- Laser power
- 40 W
- Energy
- 1–150 mJ, continuously adjustable
- Pulse width
- 0.1–100 ms
- Output
- Ultra-pulse, fractional scanning
- Scan area
- up to 20 × 20 mm
- Spot diameter
- 0.25 mm
- Spot area
- 0.05 mm²
- Patterns
- Triangle / square / round / hexagon / line
- Scan order
- Sequential / random / centre-split
- Aiming beam
- Red, ≤ 5 mW
- Beam delivery
- 7-joint articulated arm
- Cooling
- Water cooling
- Mains power
- AC 220 V or 110 V ±10%, 50 Hz
- Packed size
- 45 × 49 × 120 cm
- Weight
- 55 kg
Specifications are taken from the operator manual and may vary with configuration and software version. For professional use by trained practitioners.
Questions
What is a fractional CO2 laser?
A CO2 laser at 10,600 nm whose beam is split into a grid of micro-beams. Each beam treats a tiny column of skin and leaves the surrounding tissue intact, which supports skin renewal.
How many fractional CO2 treatments are needed?
As a guide from the operator manual, acne scar treatments are usually performed 3 to 5 times at intervals of 1 to 3 months.
Who can operate a fractional CO2 laser?
FractionaGlow CO2 is for professional use by trained and suitably qualified practitioners, in line with local regulations for ablative lasers.
Buy outright, rent, or rent to own
Rental and rent-to-own agreements through independent finance providers. Subject to status.
Warranty & serviceRepair or replace
Warranty terms are set out in your contract. We repair the device, or replace it with a new one if a repair is not reasonable.
TrainingVTCT Level 4, Ofqual regulated
A regulated qualification for practitioners using FractionaGlow CO2, delivered by KClinics Academy. Optional, at an additional cost.
Request a price for FractionaGlow CO2
Tell us about your clinic. We'll reply with pricing, delivery details and answers to your questions.